Holographix
The Krix Holographix In Ceiling loudspeaker offers a high performance sound source, in a speaker design which is virtually invisible. This small speaker is a similar size to a normal household downlight and is very simple to install for the home handyman or professional installer. The Holographix can be painted to blend in with any decore and will bring music listening pleasure to any room, from your home office to the BBQ area. For their size, the Holographix produces a smooth and accurate frequency response with good low frequency extension to 90Hz. They are also very efficient and can be used either as pairs or in multiples of two where greater sound coverage is required. Where multiple pairs are being installed a commensurate increase in the required amplifier power must be calculated to maintain the desired sound pressure level and ensure optimum performance of this system.
Specifications
| Frequency Range: | 90Hz - 20kHz in room response |
| Power Handling: | Minimum 20 watts – Maximum 40 watts RMS amplifier power |
| Sensitivity: | 87dB for 2.83 volts at 1 metre |
| Configuration: | 3 inch full range |
| Bass Drivers: | • Nominal 3" (75mm) polypropylene cone • ¾" (20mm) voice coil wound andneodymium magnet |
| Impedance: | Nominally 8 ohms |
| Enclosure Type: | Infinite baffle |
| Dimensions: | 3¾" (95mm) diameter x 4¼" (108mm) deep |
| Mounting Cut-Out Diameter: | 3¼" (83mm) |
| Finish: | White (can be painted to match your décor) or brushed chrome |
| Input Terminals: | Push type connectors |
| Weight: | 0.5kg |