KX5265
Cinema full range stage loudspeaker featuring dual 15" bass drivers in a low frequency enclosure (KX-2610) and 3" voice coil compression driver, short throw flare with 1" throat and mounting bracket (KX-3340).
The KX-2610 is a state of the art loudspeaker system and was developed by 'reverse engineering the THX' cinema loudspeaker specification. The low frequency driver parameters and the enclosure were determined from the desired requirements of a stage loudspeaker as outlined by THX. This ensured the closest embodiment of the specifications that technology allows, using components to achieve maximum efficiency. Symmetrical gap geometry, combined with the large linear voice coil travel, ensures minimum distortion at all levels. The driver also features a purpose cast ribbed cone, of specially selected paper and treatments which produce extreme bass levels.
The 3" diameter voice coil, professional compression driver features a ferrite magnet system and an integral pure titanium dome and suspension. This is attached to a precision lightweight voice coil made from edge wound aluminum ribbon, wound on a high temperature Kapton former. Together, the KX-5265 provides an exceptionally high acoustic power output over an extremely wide frequency range, with low harmonic distortion and excellent power handling. This is especially evident in the third harmonic, in the 1kHz – 3kHz region.
This complete system can also be specified with a shallow LF cabinet (KX-5265.S -380mm deep) and also with a passive filter network. Should passive filters be required please specify this model as a KX-5265.P or in the case of the shallow version KX-5265.S.P. The filters will be fitted internally.
Specifications
| Dimensions Assembled (HxWxD): | 1595mm x 665mm x 450mm |
| Bass Driver: | 2 x 15" (380mm) paper cone |
| High Frequency: | 3" compression driver, 90x40 short throw flare and bracket |
| Crossover Point: | 1kHz (use minimum 4th order filter) |
| Nominal Impedance: | 4 ohms |
| Frequency Response: | 35Hz to 18kHz (-6dB) half space |
| Tuning Frequency: | 41Hz |
| Input Terminals: | 200 amp proprietary terminal posts which will accept up to 6mm cable |
| Weight (Assembled): | 93 kg |
| Power Handling: | Thermal capacity • HF - 80 watts RMS • LF - 500 watts RMS Program power capacity • HF - 160 watts • LF - 1000 watts |
| Axial Sensitivity: | 101dB for 1 watt @ 1 metre |
| Finish: | Utility cinema black |
| Damping Material: | Fire rated polyester fibre |