Seismix 1
When space is at a premium, the Seismix 1 will deliver a small space, big bass experience. Precisely the same 200 watt amplifier and 250mm bass driver as used in the Seismix 3 are presented in a more compact enclosure, trimmer in depth, width and height. It's easier to fit into existing cabinetry and ideal for apartment living while still enriching your home theatre experience with generous, textural bass energy.
Specifications
| Frequency Range: | 26Hz – 150Hz (-6dB) in room response |
| Power Handling: | Nominal 10" (255mm) diameter paper cone driver developed for high level, low frequency reinforcement |
| Amplifier Power: | • 200 watts RMS into the nominal 4 ohm driver • Maximum instantaneous power 400 watts |
| Amplifier S/N Ratio: | >70 dB |
| Distortion - Input to Speaker: | <0.1% - @ 80 watts RMS |
| Line Level Inputs: | Left Input (mono) • Lo – 900mV RMS for maximum output • Hi – 100mV RMS Left + Right Input (stereo) • Lo – 450mV RMS for maximum output • Hi – 50mV RMS |
| Output: | 118dB maximum SPL in room response |
| Auto Power On/Off: | 15 minute delay before switching to standby after no input signal |
| Phase Select: | 0º or 180º (relative to input signal) |
| Enclosure Type: | Bass reflex, front vented |
| Dimensions (HxWxD): | 365mm x 315mm x 340mm |
| Material: | 17mm MDF |
| Finish: | Vinyl or laquered timber veneer |
| Weight: | 15kg |